Simulation and Analysis of Electromagnetic Force in Laser Melting Deposition by Electromagnetic Impact

Magnetic field was introduced in laser melting deposition to reduce the pores in workpieces.Finite 3-D model of the coil-deposition layer-substrate was established.Simulation results show that the electromagnetic force in deposition layer mainly concentrates in the projection area of the coil.Axial electromagnetic force shows repulsion in one cycle.The experimental results indicate that the magnetic field is beneficial for grain refinement,microhardness increasement and decline of quantities and average sizes of pores.     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

eLoran系统ASF网格应用算法研究

ASF网格是提高增强型罗兰（Enhanced Long Range Navigation，eLoran）系统精度的重要方法。根据所在网格四个顶点的附加二次时延（Added Secondary Factor，ASF）值通过网格应用算法得到待测试点的ASF值，一定程度上比公式计算的ASF值更准确。在计算过程中，用户四个顶点ASF值的测量误差会传递给用户，同时内插算法本身也会引入误差，此时内插算法的选择尤为重要。本文通过仿真、分析比较几种常用的内插算法，得出结论：反距离插值算法引入的误差最大，双线应插值算法引入的误差最小，而且误差呈现一定层次感，网格从内到外误差逐渐减小。     

基于自适应非结构嵌套网格的旋翼流场模拟

针对直升机旋翼CFD仿真的复杂性,提出了改进的适合于格心格式求解器的非结构嵌套网格算法。采用自适应网格技术在旋翼流场仿真的整个过程中进行网格的自适应加密和疏化操作,以更好地捕捉桨尖涡等流动细节。对于频繁的自适应过程中产生的大量重复点和无用点,采用了高效的交替数字树算法(Alternating digital tree,ADT)和标记-删除-移动算法(Mark,delete,move,MDM)进行删除,节约了不必要的存储。针对格心格式的求解器,采用了基于梯度的网格间插值方式,简化了网格间数值传递的复杂性,同时不降低求解器的精度。对CaradonnaTung旋翼悬停算例和HLISHAPE 7A旋翼悬停算例进行了模拟验证,计算值与实验值吻合,表明本文建立的方法具有良好的鲁棒性和有效性。最后,与未采用自适应时求解器对桨尖涡的捕捉效果进行了对比,结果表明本文所采用的方法可以明显地提高求解器对桨尖涡的捕捉。     

Research on navigation of satellite constellation based on an asynchronous observation model using X-ray pulsar

Pulsar navigation is a promising navigation method for high-altitude orbit space tasks or deep space exploration. At present, an important reason for restricting the development of pulsar navigation is that navigation accuracy is not high due to the slow update of the measurements. In order to improve the accuracy of pulsar navigation, an asynchronous observation model which can improve the update rate of the measurements is proposed on the basis of satellite constellation which has a broad space for development because of its visibility and reliability. The simulation results show that the asynchronous observation model improves the positioning accuracy by 31.48% and velocity accuracy by 24.75% than that of the synchronous observation model. With the new Doppler effects compensation method in the asynchronous observation model proposed in this paper, the positioning accuracy is improved by 32.27%, and the velocity accuracy is improved by 34.07% than that of the traditional method. The simulation results show that without considering the clock error will result in a filtering divergence.     

等离子体激励频率对压气机稳定性影响的实验与数值模拟研究

本文采用实验与数值模拟方法研究了不同等离子体激励频率对低速轴流压气机的扩稳特性。结果表明,等离子体激励能够显著减弱叶顶泄漏流非定常脉动,增加主流动量,削弱泄漏流和回流动量,抑制泄漏流向叶尖前缘移动,从而扩大压气机的稳定工作范围;非定常激励对压气机稳定性有重要影响,随着激励频率的增加,扩稳效果增强,但激励频率存在阈值,当频率高于0.5倍叶片通过频率时,随着频率的增加,扩稳效果几乎不变。     

Global ionospheric scintillations revealed by GPS radio occultation data with FY3C satellite before midnight during the March 2015 storm

Global observations of S4 amplitude scintillation index by the GPS Occultation Sounder (GNOS) on FengYun-3 C (FY3C) satellite reveal global dynamic patterns of a strong pre-midnight scintillations in F-region of the ionosphere during the St. Patrick’s Day geomagnetic super storm of 17–19 March 2015. The observed strong scintillations mainly occurred in the low latitudes, caused by equatorial plasma bubbles. During the main storm phase (March 17), the scintillations were first triggered in the New Zealand sector near 160°E longitudes, extending beyond 40°S dip latitude. They were also enhanced in the Indian sector, but significantly suppressed in East Asia near 120°E longitude and in Africa around 30°E longitude. During the initial recovery phase (March 18–19), the global scintillations were seldom observed in GNOS data. During the later recovery phase (after March 19), the scintillations recovered to the pre-storm level in Indian, African, and American sectors, but not in East Asian and any of Pacific sectors. These results closely correlate with observations of the density depletion structures by the Communication/Navigation Outage Forecasting System (C/NOFS) satellite, and ground-based instruments. Such consistency indicates reliability of our scintillation sensing approach even in a case-by-case comparison study. The prompt penetration electric field and disturbance dynamo electric field are suggested as the main factors that control the enhancement and inhibition of the scintillations during the storm, respectively.     

Facile Fabrication of Hierarchical Porous N/O Functionalized Carbon Derived from Blighted Grains Towards Electrochemical Capacitors

The hierarchical porous N/O co-functionalized carbon(HPNOC)was scalably prepared by using the lowcost and renewable blighted grains as the raw material coupled with mild KHCO_3 activation for electrochemical capacitors(ECs).The elemental N was in situ doped in the obtained HPNOC without any N-containing additives.Remarkably,the obtained HPNOC was endowed with a large specific surface area(about 2 624m~2·g~(-1)),high pore volume(about 1.35cm~3·g~(-1)),as well as high-content N/O functionalization(about 1.9%(in atom)N and about 10.2%(in atom)O.Furthermore,the as-resulted HPNOC electrode with a high mass loading of 5mg·cm~(-2 )exhibited competitive gravimetric capacitances of about 373.6F·g~(-1 )at 0.5A·g~(-1),and even about 260.4F·g~(-1 )at a high rate of 10A·g~(-1);superior capacitance retention of about 98.8%at 1A·g~(-1 )over 10 000consecutive cycles;and high specific energy of about 9.6W·h·kg~(-1 )at a power of 500W·kg~(-1),when evaluated as a promising electrode in 6mol KOH for advanced electrochemical supercapacitors.More encouragingly,the green synthetic strategy we developed holds a huge promise in generalizing for other biomass-derived carbon materials for versatile energy-related applications.     

薄壁微三维结构件超精密研抛技术研究

针对影响薄壁微结构件超精密研抛的工艺因素,即单次进给量、研磨轨迹、研磨膏选择和去除量精确控制,通过大量的研抛加工试验,进行研抛工艺研究,得到能实现稳定和理想加工结果的研抛工艺,很好的满足零件性能要求。